View Full Version : Baseline setup for 13.5open

Dom Ruggiere
February 18th, 2014, 08:33 PM

Dom Ruggiere
February 20th, 2014, 07:12 PM

June 22nd, 2015, 08:16 PM
dom-the current baseline 13.5 open setup shown here-versus the current 2.1 changes to xbrace standoff mount holes which would change the geometry flex of chassis----

would you say that the new chassis is more rigid thus having to soften suspension or tbar to help plant the rear ??

would you soften RR sideshock any and or create more seperation in lbs of side springs like goto a 10lbs instead of a 2lbs seperation like you have shown red/gold=2lbs.this would also allow you to run harder tire.

June 24th, 2015, 12:11 PM
And while your at it answering these questions..
explain the 60k 315k 40k... I don't get what measurement that is. Like 160k under the front arms.. 1.60? inch or millimeters?

Sorry if it seems noobish..

June 24th, 2015, 06:27 PM
When someone says 10k, it's a machining term. It's an easy way to write 10 thousandth's of an inch (aka "10 thou"). So 315k (315 thou) = .315".

June 25th, 2015, 02:48 AM
Hey James, do you have the original setup sheet in either word or how ever you did it before the .pdf
I would like to make an editable / interactive setup sheet...

I know a lot about creating these sheets and maybe I could give back and help out.. unless you have one made already..

June 25th, 2015, 04:24 AM
Thanks for helping. I will look for it. I can give you better images (more up to date) than the current sheet.

June 25th, 2015, 11:42 AM
I think I have an old Excel version of the setup sheet at home on my computer if that will help you out any.


edit: Nevermind, just went to the downloads page and saw that they were still on there.