PDA

View Full Version : 13.5 Spec Car Build



Dom Ruggiere
November 21st, 2014, 10:10 PM
Picture is worth thousand words!

This is a car I just finished up for a fellow racer... This car carries the same basic setup we use for truck / spec / stock type classes... Same setup that just qualified 2nd and finished 2nd at Oval Masters driven by Chuck Winters...

Basics:

ksg 19 front springs, 2 degree camber Right and Left

fiberglass tplate with *100k spacer between plate and bottom plate*, 40 oil with tamyia center shock black muddslide spring with HD adapter 1.5mm up travel

Assocated side shocks 30w gold LR associated spring and Silver RR associated spring

80k spacing LR - 120k RR spacing rear axle

92 spur

any questions please ask!

Tinman68
November 25th, 2014, 10:46 PM
Are you camber cutting the wgt tires

Dom Ruggiere
November 26th, 2014, 07:16 AM
Yes about 3/4 of a degree

X man
December 20th, 2014, 02:33 PM
Do you scue your body to one side

Leccese14
January 5th, 2015, 07:02 AM
Dom or chuck could you give me body post height on the COT because I am beginning to realize how important body mounting is?

Leccese14
January 5th, 2015, 07:07 AM
Also what is the length on the Tamiya shock?