Results 1 to 8 of 8

Hybrid View

  1. #1
    McPappy Team Driver Dom Ruggiere's Avatar
    Join Date
    Feb 2014
    Location
    Brick NJ
    Posts
    67

    Baseline setup for 13.5open

    Dominic Ruggiere
    McPappy Racing

  2. #2
    McPappy Team Driver Dom Ruggiere's Avatar
    Join Date
    Feb 2014
    Location
    Brick NJ
    Posts
    67
    Pictures!
    Attached Images Attached Images
    Dominic Ruggiere
    McPappy Racing

  3. #3
    dom-the current baseline 13.5 open setup shown here-versus the current 2.1 changes to xbrace standoff mount holes which would change the geometry flex of chassis----

    would you say that the new chassis is more rigid thus having to soften suspension or tbar to help plant the rear ??

    would you soften RR sideshock any and or create more seperation in lbs of side springs like goto a 10lbs instead of a 2lbs seperation like you have shown red/gold=2lbs.this would also allow you to run harder tire.
    thanks
    bill

  4. #4
    Junior Member
    Join Date
    Jun 2015
    Posts
    4
    And while your at it answering these questions..
    explain the 60k 315k 40k... I don't get what measurement that is. Like 160k under the front arms.. 1.60? inch or millimeters?

    Sorry if it seems noobish..
    Last edited by kindnuguz; June 24th, 2015 at 07:43 PM.

  5. #5
    Administrator James35's Avatar
    Join Date
    Feb 2014
    Posts
    116
    When someone says 10k, it's a machining term. It's an easy way to write 10 thousandth's of an inch (aka "10 thou"). So 315k (315 thou) = .315".

  6. #6
    Junior Member
    Join Date
    Jun 2015
    Posts
    4
    Hey James, do you have the original setup sheet in either word or how ever you did it before the .pdf
    I would like to make an editable / interactive setup sheet...

    I know a lot about creating these sheets and maybe I could give back and help out.. unless you have one made already..

  7. #7
    Administrator James35's Avatar
    Join Date
    Feb 2014
    Posts
    116
    Thanks for helping. I will look for it. I can give you better images (more up to date) than the current sheet.

  8. #8
    McPappy Team Driver cegpcola's Avatar
    Join Date
    Jan 2015
    Location
    Pensacola Florida
    Posts
    17
    I think I have an old Excel version of the setup sheet at home on my computer if that will help you out any.

    Kurtis

    edit: Nevermind, just went to the downloads page and saw that they were still on there.
    Last edited by cegpcola; June 25th, 2015 at 03:08 PM.

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

 

Copyright © 2014 McPappy.com. All rights reserved.
"McPappy Racing" name and logo are Registered Trademarks.

Product of Web Wonderland, Inc.   Made in the USA